Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
tutorials:installing_yarp_in_debian [2019/08/22 14:00]
amora [Test the installation]
tutorials:installing_yarp_in_debian [2020/01/21 07:45] (current)
admin [Install dependencies]
Line 13: Line 13:
  
 <code bash> <code bash>
-  sudo apt-get install git libace-dev libreadline6-dev libgtkmm-2.4-dev swig libopencv-highgui3.2 libopencv-core3.2 libopencv-dev cmake-curses-gui python-dev qt5-default qtmultimedia5-dev qtdeclarative5-dev qml-module-qtquick-dialogs qml-module-qt-labs-settings qml-module-qtmultimedia libopenmpi-dev qml-module-qt-labs-folderlistmodel+  sudo apt install git libgraphviz-dev ​libace-dev libreadline6-dev libgtkmm-2.4-dev swig libopencv-highgui3.2 libopencv-core3.2 libopencv-dev cmake-curses-gui python-dev qt5-default qtmultimedia5-dev qtdeclarative5-dev qml-module-qtquick-dialogs qml-module-qt-labs-settings qml-module-qtmultimedia libopenmpi-dev qml-module-qt-labs-folderlistmodel ​libqcustomplot-dev
 </​code>​ </​code>​
  
Line 19: Line 19:
  
 <code bash yarp_installer.sh>​ <code bash yarp_installer.sh>​
-  ​cd ~/​local/​src/​ +cd ~/​local/​src/​ 
-  git clone git://​github.com/​robotology/​yarp.git +git clone git://​github.com/​robotology/​yarp.git 
-  cd yarp +cd yarp 
-  mkdir build +mkdir build 
-  cd build +cd build 
-  cmake -D CMAKE_INSTALL_PREFIX=${HOME}/​local/​DIR/​yarp -D YARP_COMPILE_BINDINGS=ON -D CREATE_PYTHON=ON -D YARP_USE_PYTHON_VERSION=$(echo $(python --version) | tr -d a-zA-Z[:​blank:​]) -D CREATE_YARPDATADUMPER=OFF -D CREATE_GUIS=ON -D ENABLE_yarpmod_opencv_grabber=ON .. +cmake -D CMAKE_INSTALL_PREFIX=${HOME}/​local/​DIR/​yarp -D YARP_COMPILE_BINDINGS=ON -D CREATE_PYTHON=ON -D YARP_USE_PYTHON_VERSION=$(echo $(python --version) | tr -d a-zA-Z[:​blank:​]) -D CREATE_YARPDATADUMPER=OFF -D CREATE_GUIS=ON -D ENABLE_yarpmod_opencv_grabber=ON YARP_COMPILE_yarpviz=ON .. 
-  make -j10 +make -j10 
-  make install +make install 
-  cd ~/​local/​DIR +cd ~/​local/​DIR 
-  xstow yarp+xstow yarp
 </​code>​ </​code>​
  
  • tutorials/installing_yarp_in_debian.1566500417.txt.gz
  • Last modified: 2019/08/22 14:00
  • by amora